How To Choose A Sweater That Is Not Easy To Pilling?

Answer: there will always be friction in woolen sweater. The fibers in the fabric will be loosened and entangled in motion, and they will be rubbed together to form pits.

This phenomenon is more or less exist in natural fibers and chemical fiber fabrics. The national textile industry standard is only a reference index for pilling, and it is not used as an index for assessment.

Pilling is mainly influenced by appearance, which is not harmful to the internal quality. It is also a problem of textile technology that remains to be solved internationally.

Choose a few woolen sweaters that are not easy to pilling.

Weaving is exquisite.

Generally speaking, fine needles,

Tightness of coarse needle, coarse yarn and loose knitted sweater are not easy to pilling.

The handle is tight and not fluffy.

When the wool is spinning, the yarn twist of the yarn is relaxed because of the soft feel of the wool yarn, so that the fiber is relatively loose. When the sweater is rubbed, the short fiber will slip away from the yarn and form a ball.

But the twist is tight and the pilling phenomenon is less, but the feel of the sweater will be stiff.

Some of the thickness is thin.

Thin sweaters are mostly plain knitted one-sided sweaters. They are more compact and easier to pilling.

Most of the thick spots are Siping, the density of the needle ring is tight, and the fibers are tightly interlocked. After the yarn is rubbed, the fiber slips relatively little from the yarn, so it is not easy to pilling.

To reduce pilling, try to avoid friction with rough surfaces.

Some areas where friction is more likely, such as sleeves and desktop, sofa handrails, inner bags, wallets, etc., also include long backpacks, rough clothing with no lining.

Special pilling should minimize such contact.

A little less visible pilling on the part can be gently removed from the fingers or scissors with a small scissors. With the brush of Yi Shuashun, the sweater can be spread evenly on the flat top table, brush the dust lightly with the brush of the fabric, straighten and tighten tightly, use the special electric shaver to gently and vertically suck, shave the ball, brush it and brush it, conditionally reoccupy the steam iron, immediately clean and neatly, and will not damage the woollen sweater at all.